View IRH9250_280397.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD - 91392B
RADIATION HARDENED POWER MOSFET THRU-HOLE (T0-204AE)
Product Summary
Part Number Radiation Level RDS(on) IRH9250 100K Rads (Si) 0.315 IRH93250 300K Rads (Si) 0.315
IRH9250 200V, P-CHANNEL
RAD Hard HEXFET TECHNOLOGY
TM (R)
ID -14A -14A
TO-204AE
International Rectifier's RADHard HEXFET(R) technology provides high performance power MOSFETs for space applications. This technology has over a decade of proven performance and reliability in satellite applications. These devices have been characterized for both Total Dose and Single Event Effects (SEE). The combination of low Rdson and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters.
Features:
n n n n n n n n n
Single Event Effect (SEE) Hardened Low RDS(on) Low Total Gate Charge Proton Tolerant Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Package Light Weight
Absolute Maximum Ratings
Parameter
ID @ VGS = -12V, TC = 25C ID @ VGS = -12V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction Storage Temperature Range Lead Temperature Weight -14 -9.0 -56 150 1.2 20 500 -14 15 -41 -55 to 150
Pre-Irradiation
Units A
W
W/C
V mJ A mJ V/ns
o
C
300 ( 0.063 in.(1.6mm) from case for 10s) 11.5 (Typical )
g
For footnotes refer to the last page
www.irf.com
1
12/4/01
IRH9250
Pre-Irradiation
Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified)
Parameter Min Typ Max Units
-- -- 0.315 0.33 -4.0 -- -25 -250 -100 100 200 45 85 60 240 225 220 -- V V/C V S( ) A
Test Conditions
VGS = 0V, ID = -1.0mA Reference to 25C, ID = -1.0mA VGS = -12V, ID = -9A VGS = -12V, ID = -14A VDS = VGS, ID = -1.0mA VDS > -15V, IDS = -9A VDS= -160V ,VGS=0V VDS = -160V, VGS = 0V, TJ = 125C VGS = -20V VGS = 20V VGS =-12V, ID = -14A VDS = -100V VDD =-100V, ID = -14A VGS =-12V, RG = 2.35
BVDSS Drain-to-Source Breakdown Voltage -200 -- BV DSS/T J Temperature Coefficient of Breakdown -- -0.24 Voltage RDS(on) Static Drain-to-Source On-State -- -- Resistance -- -- VGS(th) Gate Threshold Voltage -2.0 -- g fs Forward Transconductance 4.0 -- IDSS Zero Gate Voltage Drain Current -- -- -- -- IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 10
nA
nC
ns
nH
Measured from Drain lead (6mm /0.25in from package) to Source lead (6mm /0.25in. from
Package) with Source wires internally bonded from Source Pin to Drain Pad
Ciss Coss Crss
Input Capacitance Output Capacitance Reverse Transfer Capacitance
-- -- --
4200 690 160
-- -- --
pF
VGS = 0V, VDS = -25V f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
IS ISM VSD t rr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time
Min Typ Max Units
-- -- -- -- -- -- -- -- -- -- -14 -56 -3.6 775 7.2
Test Conditions
A
V nS C Tj = 25C, IS = -14A, VGS = 0V Tj = 25C, IF = -14A, di/dt -100A/s VDD -50V
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
R thJC RthJA RthCS Junction-to-Case Junction-to-Ambient Case-to-Sink
Min Typ Max Units
-- -- -- -- 0.83 -- 30 0.12 --
C/W
Test Conditions
Typical socket mount
Note: Corresponding Spice and Saber models are available on the G&S Website. For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics Pre-Irradiation
IRH9250
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25C, Post Total Dose Irradiation
Parameter
BVDSS VGS(th) IGSS IGSS IDSS RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source On-State Resistance Diode Forward Voltage
100K Rads(Si)1
300K Rads (Si)2
Units
Test Conditions
VGS = 0V, ID = -1.0mA VGS = VDS, ID = -1.0mA VGS = -20V VGS = 20 V VDS=-160V, VGS =0V VGS = -12V, ID =-9A VGS = 0V, IS = -14A
Min -200 -2.0 -- -- -- -- --
Max -- -4.0 -100 100 -25 0.315 -1.9
Min -200 -2.0 -- -- -- -- --
Max -- V -5.0 -100 nA 100 -25 A 0.315 -1.9 V
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
VDS(V) @VGS=0V Cu Br 28 36.8 285 305 43 39 -200 -200 @VGS=5V -200 -200 @VGS=10V -200 -160 @VGS=15V 200 -75 @VGS=20V -- --
Ion
LE T MeV/(mg/cm))
Energy (MeV)
Range (m)
-250 -200 VDS -150 -100 -50 0 0 5 10 VGS 15 20 Cu Br
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRH9250
Pre-Irradiation
100
-I D , Drain-to-Source Current (A)
-5.0V
-I D , Drain-to-Source Current (A)
VGS -15V -12V -10V -9.0V -8.0V -7.0V -6.0V BOTTOM -5.0V TOP
100
VGS -15V -12V -10V -9.0V -8.0V -7.0V -6.0V BOTTOM -5.0V TOP
-5.0V
10 1 10
20s PULSE WIDTH T = 25 C
J 100
10 1
20s PULSE WIDTH T = 150 C
J 10 100
-VDS , Drain-to-Source Voltage (V)
-VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
100
3.0
R DS(on) , Drain-to-Source On Resistance (Normalized)
ID = -14A
-I D , Drain-to-Source Current (A)
2.5
TJ = 25 C TJ = 150 C
2.0
1.5
1.0
0.5
10 5 6
V DS = -50V 20s PULSE WIDTH 7 8
0.0 -60 -40 -20
VGS = -10V
0 20 40 60 80 100 120 140 160
-VGS , Gate-to-Source Voltage (V)
TJ , Junction Temperature ( C)
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
4
www.irf.com
Pre-Irradiation
IRH9250
8000
-VGS , Gate-to-Source Voltage (V)
C, Capacitance (pF)
6000
VGS = Ciss = Crss = Coss = 0V, f = 1MHz Cgs + Cgd , Cds SHORTED Cgd Cds + Cgd
20
ID = -14 A
16
VDS = 160V VDS = 100V VDS = 40V
Ciss
4000
12
C oss
2000
8
C rss
0 1 10 100
4
0 0 50
FOR TEST CIRCUIT SEE FIGURE 13
150 100 200
-VDS , Drain-to-Source Voltage (V)
QG , Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
100
1000
-ISD , Reverse Drain Current (A)
OPERATION IN THIS AREA LIMITED BY R
DS(on)
10
TJ = 25 C
-ID , Drain Current (A) I
TJ = 150 C
100
100us
10
1
1ms
0.1 0.0
V GS = 0 V
0.5 1.0 1.5 2.0 2.5 3.0 3.5
1
TC = 25 C TJ = 150 C Single Pulse
10 100
10ms
1000
-VSD ,Source-to-Drain Voltage (V)
-VDS , Drain-to-Source Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
www.irf.com
5
IRH9250
Pre-Irradiation
15
VDS VGS
RD
12
D.U.T.
+
-ID , Drain Current (A)
9
VGS
Pulse Width 1 s Duty Factor 0.1 %
6
Fig 10a. Switching Time Test Circuit
3
td(on) tr t d(off) tf
VGS
0 25 50 75 100 125 150
10%
TC , Case Temperature ( C)
90%
Fig 9. Maximum Drain Current Vs. Case Temperature
VDS
Fig 10b. Switching Time Waveforms
10
Thermal Response (Z thJC )
1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01
SINGLE PULSE (THERMAL RESPONSE)
0.01 0.0001
Notes: 1. Duty factor D = / t2 t1 2. Peak T=P DM x ZthJC + T J C 0.1 0.01
PDM t1 t2 1
0.001
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
-
RG
VDD
Pre-Irradiation
IRH9250
1200
VDS
L
EAS , Single Pulse Avalanche Energy (mJ)
1000
RG
D .U .T
IA S
VD D A D R IV E R
ID -6.3A -8.9A BOTTOM -14A TOP
-20V VGS
800
tp
0.0 1
600
15V
400
Fig 12a. Unclamped Inductive Test Circuit
IAS
200
0 25 50 75 100 125 150
Starting TJ , Junction Temperature( C)
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
tp V (BR)DSS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
QG
50K 12V .2F .3F
VG
VGS
-3mA
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
www.irf.com
+
QGS
QGD
D.U.T.
-
12 V
VDS
7
IRH9250
Pre-Irradiation
Foot Notes:
Repetitive Rating; Pulse width limited by
maximum junction temperature. VDD = -50V, starting TJ = 25C, L=5.1mH Peak IL = -14A, VGS =-12V ISD -14A, di/dt -600A/s, VDD -200V, TJ 150C
Pulse width 300 s; Duty Cycle 2% Total Dose Irradiation with VGS Bias.
12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. Total Dose Irradiation with V DS Bias. -160 volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions -- TO-204AE
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 12/01
8
www.irf.com

▲Up To Search▲

Price & Availability of IRH9250

	To Download IRH9250 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .